GTA 6 stick drift fix for PS5 and Xbox
Updated . Researched from cited sources, not hands-on tested.
To fix stick drift in GTA 6, open Options, Settings, Controller and raise the deadzone for the drifting stick one step at a time until movement stops. Left moves your character and right moves the camera. If it needs a very high value or drifts in other games, the stick is worn.
On this page
Test your sticks
Connect the controller to this computer or phone, press any button, then take your thumbs off both sticks. Nothing is uploaded.
An offset under 5% at rest is usually hidden by a small deadzone. Our 5% and 10% thresholds are rules of thumb, not manufacturer limits.
A pad that shakes instead has a vibration setting or fault. A pad that cuts out has a different fault. Once the test is clean, tune the controller settings.
Which stick is drifting?
| Symptom | Stick | Setting |
|---|---|---|
| Character walks alone | Left | Deadzone (Left Stick) |
| Car steers alone | Left | Deadzone (Left Stick) |
| Camera turns alone | Right | Deadzone (Right Stick) |
| Aim slides | Right | Deadzone (Right Stick) |
Set the deadzone
- Stand still somewhere safe and take your thumbs off both sticks.
- Open Options → Settings → Controller.
- Raise the affected stick's deadzone by one step.
- Return to the game and watch for 10 seconds.
- Repeat until it stops, then leave it there.
Each slider runs from 0 to 10. Published guides disagree on the default, listing 4 or 5, so count from the value you see. A higher number also ignores small movements you make on purpose, which makes fine aiming harder.
Clean and reset the controller
General troubleshooting as of Nov 22, 2026
- Turn the controller off.
- Wipe the outside with a damp cloth.
- Clean around the stick dome with a swab and 90% isopropyl alcohol.
- Let it dry completely.
- Reset it. On DualSense, press the button in the rear pinhole for at least 5 seconds with the console off.
Repair or replace?
General troubleshooting as of Nov 22, 2026
| Result | What to do |
|---|---|
| A step or two fixes it | Keep playing |
| It keeps needing more | Plan a repair |
| It drifts in every game | Repair or replace |
| Under warranty | Contact Sony or Microsoft before opening it |
Cleaning may only help for a while, because track wear is permanent. A standard DualSense stick needs soldering to replace. A DualSense Edge has modules that slide out.
Sony DualSense Edge
Replaceable stick modules, back buttons and saved profiles.
Costs far more, and spare modules are sold separately.
Check the evidenceIf the pad drops out as well, work through GTA 6 controller disconnecting before you buy.
Frequently asked questions
What is the best GTA 6 deadzone?
The lowest value with no unwanted movement. It differs between controllers, so there is no single best number.
Can a setting repair stick drift?
No. A deadzone hides small unwanted inputs. It doesn't repair the hardware.
Why does my GTA 6 camera move by itself?
Test the right stick's deadzone first. If raising it stops the movement, that stick is drifting.
Sources
Related GTA 6 guides
- GTA 6 controller disconnecting: PS5 and Xbox fixesGTA 6 controller disconnecting on PS5 or Xbox? Find out in two minutes whether it's the battery, wireless link, firmware or the controller itself.
- Why is my GTA 6 controller vibrating constantly?GTA 6 controller vibrating nonstop? Turn vibration down or off in the game, on PS5 or on Xbox, and see what's known about the launch rumble bug.
- GTA 6 gift ideas for every budgetGTA 6 gift ideas for PS5 and Xbox players, from $4.99 official merch to the game, storage and headsets, plus what to check before you buy.